BIM Clash Detection Services - Problem or Issue resolver before it occurs | Silicon Engineering Consultants LLC
In the current era, the engineering designs are considered to be an effective tool. It is an effective coordination between several owners and stakeholders to get the desired results. It is the dynamic process of the engineering design and is a result-oriented services. The construction design of the s, the project involves the team of different stakeholders and they are the engineers, designers, architects, drafters, contractors, and vendors. With the piece of knowledge, they have they can complete the process of the project, no matter how complex it may be.
It is a universal fact that the entire building design and the construction system are duly facing a challenge and that is related to the delivery and completion of the project timely and accurately. Thus, there are certain elements that become a crucial element during the entire designing phase.
Well, thanks to the service of clash detection in building information modeling that is a helping hand for speeding up the projects and by identifying the clashes whichever may occur during the stage of design itself. It is helping the architects and the contractors who ensure to eliminate these changes that are required at the multi-level of the design changes. This also shares the result that is solely related to the budget or delay in delivering the project within the specified timeline.
What is Clash Detection? How and Why it is used?
The term clash detection is a critical part of the entire process of BIM modeling services. We all know that building information modeling is the process that involves the creation of extensive and comprehensive model that is including the designing model and that from the different disciplines and standards of the engineering design.
The team of different people such as architects, MEP engineers, structural engineers, HVAC engineers, and other professional members who are creating the design models are very much independent from each other. Once the BIM model is created by these numbers of people, the service of clash detection comes into existence.
Clash detection is the service that gives clarity and assist in knowing the places where even the virtual design of the 3D models fails to communicate. The detection service helps in identifying the smallest error or clashes in the design before the actual construction takes place. This is the service that indeed saves a lot of time of the contractors and the contractors so as to avoid any delay in delivering the BIM project.
By following the architect and engineering design disciplines, it is the service of clash detection that helps in identifying the elements of the models that are getting overlap from one model to another. Indeed, clash detection ensures that every work is done hand-in-hand and nothing is left out or incompatible.
Using the advanced stage of CAD 3D modeling, there are some of the points where at the last-minutes all these hurdles and the inconsistencies in various models are getting eliminated or deleted. As off major of the error is taken care of at the initial designing stage, the process of clash detection saves a lot of valuable time, money, and energy that is served throughout the entire process of BIM Services and its execution plan during the stage of constructing the project.
Three major types of Clashes - Silicon Engineering Consultants LLC
Let us now proceed further and have a look at the three major types of the clash services that assist in making the entire process of the service easy and fast.
- Hard Clash
It is when any of the two objects are getting interfered with one another, the best example that suits is the plumbing line if the same is going in the wrong direction.
- Soft Clash
It is where any of the objects is not having any specific or sufficient strength of design tolerance. For ex: the process of HVAC requires spacing and maintenance work so as to check the operational work is easy and firm, but if at all in constructing the building there is a lack of design then the same can be viewed only in the stage of soft clash.
- Workflow Clash
If the building design is having any type of inconsistency or the building information is getting conflicted then the result here would be not as per the expectation and it is basically not an object clash, rather it is in BIM a workflow clash. Forex: the scheduling of the HVAC maintenance purpose that is not at all scheduled and aligned in proper delivery of the spare parts.
Frequently Asked Questions?
- What is Clash Detection Services?
A "clash" is the outcome of the two elements that are taking the same space in the design. In building information modeling, the technique that is used to identify these errors is termed as Clash Detection. It will give the information and identify if, and, where or how the two parts of the product are getting interconnected with each other. The best example is plumbing and the walls.
- What are the three major types of clashes?
The entire BIM clash detection service is defined in three major types and those are Hard Clash, Soft Clash, and Workflow Clash.
- In which systems BIM clash detection allows to check its services?
The BIM clash detection service and resolution service gives access to the clients to detect the clashes between various systems such as architectural, electrical, plumbing, mechanical, and structural.
- What is the delivery time BIM clash detection services?
It totally depends on the size of the project and the complexity of the project.
- In which type of project clash detection service is taken into consideration?
The projects in which this clash detection is taken into consideration is institutes, hospitals, hotels, industrial units, residential homes, commercial buildings, retail buildings, and other major big size projects.
To know more about the service and to resolve the issue in your BIM project with the help of Clash Detection then we are at your service. Contact us! And the team is at your service.